Drive Shaft and Gearbox Each metering transmission is ground driven via a Drive Shaft and Gearbox.
Provides a clean & efficient transfer of power
Longer, trouble free operation with virtually zero
maintenance
Self resetting torque limiters protect
the metering transmissions
Tire
Options The Tire Options available are designed to minimize compaction
while transporting a large quantity of product. Correct
tire loading is not only important for reduced compaction,
but also for safe operation of the unit.
Refer to Specifications Page for
details on tire spacings available.
Self-Resetting
Torque Limiting Clutch A Self-Resetting Torque Limiting Clutch is located on each
metering transmission.
Clutch will begin to slip when torque
is excessive
The clutch will self reset when the
problem has been corrected
Protects the transmission and metering
augers from damage due to foreign objects jamming
the metering system
Working
Lights The working lights option includes lights around the metering
transmissions, the sides of the tank, the load/unload auger
head, cat walk, and on the rear of the air seeder. These
lights give excellent illumination around the seeding unit
during night time operation.
Class
A Straight-Thru Primary Line Design The Class A Straight-Thru primary line design makes it very
easy to direct the contents of any tank into any air stream.
This allows the operator to set up his seeding operation
in the single, double, or multi-shoot mode. Tank cleaning
is clean and simple, with an unobstructed drop into the load/unload
auger hopper.
