en-USru-RUen-AU
Language
Menu
  1. Продукция
    1. Пневматические бункеры
    2. Посевные комплексы FMS™
    3. Системы для внесения удобрений в междурядья
    4. Air Planter™
    5. Посевной комплекс анкерного типа
    6. Посевной комплекс 4420 DKD™
    7. Почвообработка
    8. Бороны
    9. Спиральные прикатывающие катки
    10. Бак для внесения жидких удобрений LFC
    11. Бункеры-накопители
  2. Поиск дилера
  3. Поддержка клиентов
  4. Запчасти
  5. Агрономия

Центр поддержки клиентов Bourgault

Navigation


Older Air Seeder Monitors

This chart is to help you determine the model number of the various monitors used by Bourgault air seeders over the years.

82000 Monitor Part # AS12782

  • Offered on select 115, 2115, 2155 air seeders
  • May be confused with the 101 monitor - check bottom right corner of face plate
  • Displays fan RPM & low bin alarm
82000 Monitor

70000 Monitor Part # AS12781

  • Offered on select 180, 155, 135 air seeders
70000 Monitor

132 Monitor Part # AS12754

  • Offered on 2130, 2135, 2155, 3165 & 3195 air seeders
  • Displays acres / ground speed / calibration

101 Monitor Part # AS12751

  • Offered on 2115, 2115sp, 2130, 2135, 2155, 2195, 3165 & 3195 air seeders
  • Displays fan RPM / shaft stop alarm / low bin alarm
132 & 101 Monitor

198 Monitor Part # 3120-41-01

  • Offered on 2130, 2135, 2155 & 3165 air seeders
  • Displays acres / calibration
 
198 Monitor

149 Monitor Part # 3120-50-02

  • Offered on 2135, 3165, 3170, 3195 & 3225 air seeders

149 Module Part # 3120-50-01

  • May be used in conjunction with the 149 Monitor
  • Typically located under fifth wheel plate
149 Monitor
149 Module

277 Module Part # 3120-65-12

  • Offered on 2130, 2135, 2155, 3170, 3195, 3200, 3225, 4000 Series & 5000 Series air seeders
  • Uses "Mux Bus" wiring system
  • White = Power (12v)
  • Black = Ground
  • Green = Data
277 Monitor

Model 491 Monitor

Part # 3130-20 (v2.02)

Part # 3130-21 (High Power)

  • Offered on 3170, 3200, 3225, 4000 Series, 5000 Series, and 6000 Series air seeders. The high power version is also available on 6000 Series Air Seeders.
  • The regular and high power monitors can be differentiated between by noting the designation of "HP -High Power" on the faceplate.
  • The high power monitors are required for units with full run optical blockage sensors.
491 Monitor

Model 591 Air Seeder Monitor

  • Offered on the 6000 Series Air Seeders
  • The Model 591 Monitor provides standard monitoring features for up to four bins.
  • The 591 Monitor can be easily interchanged with the previous 491 Deluxe Air Seeder Monitor.
591 Monitor
  • Monitor air seeder statistics, including fan speed, application rate, bin levels, area seeded, & ground speed.
  • The large screen will allow you to monitor up to eight functions on one page.
  • Four pages are available to customize. You can easily toggle between each page to monitor functions on each page.
  • Case drain pressure is monitored to help prevent costly hydraulic fan motor damage.
  • Available with optional Cab Rate Adjust and Zone Rate Control to adjust application rates on the go.
  • Available with optional Fan Controller.
  • Four level bin level sensors.

ZYNX X15 / Bourgault SRC System Part # 3131-00

  • Offered on 6000 Series & select 5000 Series air seeders.
  • The ZYNX console is a Windows based computer system contained within an ABS housing.
  • 6.4" VGA touch screen display and a stylus pen is included for making screen selections.
ZYNX X15 Monitor / Controller
 
  • Interfaces - 4 x Serial Ports; 2 x USB Ports; PS2 Port; LAN Port; Canbus (harness)
  • The console is supplied with the Bourgault SRC and ZYNX Guidance programs installed. Optional software can be added for other applications.
  • ZYNX Monitor / Control System requires specific sensors and harnesses, including an ECU module located on the air seeder frame.

Topcon X20 / Bourgault SRC System

  • Offered on 6000 Series air seeders
  • Windows XP Professional operating system
  • 8.4” (21.3cm) colour touch screen, 800 x 600 pixel dimensions
Topcon X20 Monitor / Controller
  • Interfaces - 4 x RS232 Serial ; 4 x USB 2.0 Ports; 1 x 10/100 Base T Ethernet Port (RJ45)
  • 1GHz processor, 2Gb hard drive, & 512Mb of RAM
  • Single run blockage monitoring for both single and double shoot air seeder kits
  • All sensors, clutches, and actuators connected to a central control box (ECU) on the air seeder, with a single harness from it to the monitor in the tractor cab

Index

Back To Top