en-USru-RUen-AU
Language
Menu
  1. Продукция
    1. Пневматические бункеры
    2. Посевные комплексы FMS™
    3. Системы для внесения удобрений в междурядья
    4. Air Planter™
    5. Посевной комплекс анкерного типа
    6. Посевной комплекс 4420 DKD™
    7. Почвообработка
    8. Бороны
    9. Спиральные прикатывающие катки
    10. Бак для внесения жидких удобрений LFC
    11. Бункеры-накопители
  2. Поиск дилера
  3. Поддержка клиентов
  4. Запчасти
  5. Агрономия

Центр поддержки клиентов Bourgault

Navigation


2. System Tab

2. System Tab

This section shows where to set the console feature on to enable weight scales, and to enable the Xtend feature.

System Op Man - Operator's manual pages for the settings for the System tab

System Tab - Step by step PDF with screen shots for the System tab.

A.3 - System Setup

This video presentation shows where to set the console feature on to enable weight scales, and to enable the Xtend feature.


The following are more detailed descriptions and step by step instructions for tabs under System

Access Levels (Apr 2020 Update) - The interface for the X35 or X30 can be modified to match user level.  It also helps minimize confusion by turning off unused icons.  Three different levels can be set-up to accommodate multiple operators on the same system.

X35 Access Levels - Step by step PDF with screen shots for the Access Levels tab

Bourgault X30 & X35 Seeder Controller - Access Levels

Access Levels is a feature in the X30 & X35 Apollo seeder controller that allows you to create up to 3 different screen settings. You can chose to turn off unused buttons to simplify the layout, or restrict access for specific features to select operators.


Xtend Setup - This section demonstrates how to enable, then link a wifi enabled device to the X35.

Xtend Setup Op Man 4.01.509 - Operator's manual pages for the settings for the Xtend tab

X35 Xtend version 4.01.509 - Step by step PDF with screen shots for the Xtend tab

Xtend manual version 4.04.516 - Operator's manual pages for the settings for the Xtend tab

X35 Xtend version 4.04.516 - Step by step PDF with screen shots for the Xtend tab


Quick Start Settings - Quick Start prompts for specific jobs to be carried out at the beginning of each seeding operation, such as saving the previous job before starting a new one.

QuickStart Op Man - Operator's manual pages for the settings for the QuickStart tab

QuickStart - Step by step PDF with screen shots for the QuickStart tab

A.5 - Quick Start Settings

Quick Start will provide an efficient process to close previous jobs and start a new seeding job which can be tailored to your operation.


GPS Setup - Proper GPS setup will allow the X35 to provide various applications including guidance, variable rate control and mapping.

GPS Op Man - Operator's manual pages for the settings for the GPS tab

GPS - Step by step PDF with screen shots for the GPS tab

Reverse Detection Alarm - Work-Around for "Reverse Direction" on X35 v4.02.511

A.6 - GPS Setup

Proper GPS setup will allow the X35 to provide accurate and trouble-free guidance, variable rate control and mapping.


Alarms - Alarms are provided as a warning if any components or functions of the seeding system are not functioning properly.

Alarms Op Man - Operator's manual pages for the settings for the Alarms tab

A.7 - Alarms Setup

Correctly set system and seeder alarms for valuable feedback if any components or functions of the seeding system are not functioning properly.


 

Previous 2.01 - Access Levels

Index

Back To Top