SPECIFICATION

3330SE & 3335QDA Paralink™ Hoe Drills

 
MODELS
3330-30
3330/35-40
3330/35-50
3330/35-60
3330/35-66
3330/35-76
3330/35-80
3330/35-86
 
No. of Sections
3
3
5
5
5
5
5
5
No. of Rows
3
3
3
3
3
3
3
3
Working Widths
 
 
 
 
 
 
 
 
  10"
9.1m
12.2m
15.2m
18.3m
20.3m
23.4m
24.4m
26.4m
  12"
9.1m
12.2m
15.9m
18.3m
20.7m
23.2m
24.4m
25.6m
Transport Width
4.9m
5.9m
6.4m
7.4m
7.5m
7.6m
8.9m
8.9m
Transport Height (max)
4m
5m
4.9m
14.8m
5.3m
5.7m
6.1m
6.1m
Weight (approx kg)
10" w/ MRB
9,150
12,200
15,350
18,400
20,650
22,500
28,150
29,300
12" w/ MRB
8,500
11,350
14,100
16,900
19,000
20,650
27,000
27,700
Add approximately 3,500 kg to 60', 66', or 76' unit when the Hi-Flotation running gear option is added.   The exception is the 86' where HF is standard.
Tyres
Main Frame Front
11LX15FI
13.5LX15FI
13.5LX15FI
16.5LX16.1FI*
16.5LX16.1FI*
16.5LX16.1FI*
800/65R32
800/65R32
Main Frame Rear
11LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI***
13.5LX15FI***
13.5LX15FI***
16.5LX16.1FI
16.5LX16.1FI
Inner Wing Front
11LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI**
13.5LX15FI**
13.5LX15FI**
540/65R24
540/65R24
Inner Wing Rear
11LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
Outer Wing Front
N/A
-
13.5LX15FI
13.5LX15FI**
13.5LX15FI**
13.5LX15FI**
540/65R24
540/65R24
Outer Wing Rear
N/A
-
13.5LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
13.5LX15FI
 
 
 
 
 
 
 
 
 
* Optional 800/65 R32 when HF selected
** Optional 540/65 R24 when HF selected
*** Optional 16.5 x 16.1FI when HF selected
 
 
Packer Options
4.5" V-Tread Semi-Pneumatic
4.5" Round Semi-Pneumatic
5.4" Round Semi-Pneumatic
Trip Assembly Travel
PLS, PLDS: + or - 152mm (6") PLX: + or - 203mm (8")
Depth Adjustment
PLS, PLDS: 1/6" increments, (0 to 2½" range) / PLX: ¼" increments
Front to Rear Wheel
Without MRB III - 4.4m (172"), with MRB III - 4.9m (194"), with MRB III and HF option - 5.6m (222")
Rear Drop Hitch (Opt)
For pulling liquid or NHtanks with lower hitch pull points
MRB III
Optional MRBs for optimal seed to fertilizer separation
MRS III
Optional MRS III (hydraulic mid row shank) available on 10" and 12" spacing
*all weights and transport dimensions are estimates and are subject to change.
Every effort has been made to ensure that the information is accurate/current at the time of production. For the latest product information check out our website at: www.bourgault.com
 
Hi-Flotation Package
Refer to the 3330/3335 Hi-Flotation web page for detailed information.
 
3330/3335 PHD - Hydraulic Requirements

Recommended Flow Requirements:

Hydraulic flow requirements are highest when turning on the headlands. The recommended flow allows the seeding system to be raised and lowered within two headlands. It should be noted that the recommended fan requirements are for the maximum operational speed (RPM) of the fan.

Minimum Hydraulic Flow Requirements:
  • Recommended hydraulic flow should provide minimal fan slowdown during headland turns.  The openers will take hydraulic flow priority over the fans.
  • If operating at minimum flow requirements, the air seeder fans will drop a minimum of 20% during headland turns.  This may require a 3rd headland to allow the openers time to raise and lower.
  • In typical operating conditions one or both fans are operating at less than maximum output levels, which will reduce hydraulic requirements.
FLOW REQUIREMENTS
MINIMUM GPM
RECOMMENDED GPM
DEPTH CIRCUIT (10" spacing with MRB)
20
30
DEPTH CIRCUIT (10" spacing without MRB)
15
22
DEPTH CIRCUIT (12" spacing with MRB)
18
25
DEPTH CIRCUIT (12" spacing without MRB)
13
18

Pressure Requirements:
  • With many tractors, maximum hydraulic flow drops off sharply prior to maximum operating pressure. By setting the tractor to a pressure setting of 3100 psi the hydraulic flow will be near the rated output at the maximum operating pressure.
  • The 3320 Paralink Hoe Drill has a minimum and recommended operating pressure of 2500 psi.
Coupler Requirements:
  • A 13mm (½”) coupler is only rated for flow rates of 12 gpm.  As flow increases beyond this value, a large pressure drop is created across the couplers which in turn increases pressure requirements. The durability of the 13mm (½”) couplers can also be compromised when operating at high flow rates.
  • It is recommended to use 19mm (¾”) couplers on the tractor and implement, as this will greatly reduce the pressure drops and will increase the flow of oil to the fan or opener cylinders.
Air Seeder - Hydraulic Requirements

PRINT